Vision Statement

The Department of Electronics and communication engineering supports the mission of the College by providing programs of the highest quality to produce world class engineers through teaching, research and service who can address challenges of the millennium and To be recognized by the society at large as an excellent department.

Mission Statement

To achieve the vision the department will

  • Ensure effective teaching–learning process to provide in-depth knowledge of principles and its applications pertaining to Electronics & Communication Engineering and interdisciplinary areas equip the students with strong foundations to enable them for continuing education
  • Nurtures the spirit of innovation and creativity among faculty and students.
  • Inculcate creative thinking through innovative and group work exercises which enhances the entrepreneur skills, employability and research capabilities

About the Department

The Department of Electronics and Communication Engineering, was established in the year 2008 with the intent of raising highly qualified Engineers, Entrepreneurs and Researchers who can make substantial contribution to the field of Electronics and Communication Engineering. It was started with an intake of 60 and it was increased in the year of 2012 as 120. . The department has a  strength of 300 students guided by a team of devoted and diligent staff members. The research interests of the faculty members of the department encompass the wide area of applied and fundamental aspects of Electronics and Communication Engineering. It offers innovative approaches for teaching-learning and encourages virtual learning with un-compromised professional ethics.

Laboratory Information

The department of ECE has various laboratories equipped with latest hardware’s and software’s. The department of ECE has over 8 laboratories which are given below:

  • IMG_2456
  • LIC LAB

LINEAR INTEGRATED CIRCUITS LAB

Experiments performed in the lab range from hardware design and implementation of rectifiers, analysis of comparators, synchronous and asynchronous counters, latches, frequency-meter, opamp applications etc.

Lab Equipments :

  1. Dual Trace Oscilloscope
  2. Digital Multimeter,
  3. Dual Regulated Power Supply
  4. Linear Power Supply
  5. Function Generator,
  6. IC testers

ELECTRONICS LAB
  • IMG_2597
  • ELEC

Lab Equipments:

  1. 30MHz Oscilloscopes
  2. Function Generators
  3. Digital Desktop Multimeters
  4. Multi Output DC Power Supply

ELECTRONICS LAB
  • IMG_2607

Lab Equipments:

  1. 30MHz Oscilloscopes
  2. Function Generators
  3. Digital Desktop Multimeters
  4. Multi Output DC Power Supply

MICROPROCESSOR LABORATORY
  • IMG_2510
  • IMG_2516

Lab Equipment’s:

  1. 8085 Microprocessor,
  2. 8086 Microprocessor,
  3. 8051 microcontroller
  4. Interfaces -Traffic light interface, Traffic Light Controller Board, Accessories – 26 Core, Dual DAC with ADC X temp Measure & control, AD 590 Transducer, 8251 x 8253 interface board, Stepper Motor Interface Card, Stepper Motor Controller

SIGNAL PROCESSING AND VLSI LAB
  • IMG_2605

Lab Equipment’s:

  1. XILINX FPGA,
  2. XILINX Spartan 500E Trainer kit(VVSM-06)
  3. TMS320C5X DSP Trainer Kit
  4. Signal Generators
  5. CRO

OPTICAL AND RF LAB
  • IMG_2494
  • IMG_2482

Lab Equipments

  1. Network analyser
  2. Microwave Bench
  3. Microwave Power meter
  4. VSWR meter
  5. Microwave components
  6. Optical Transmission and Reception kit
  7. Optical power source
  8. Optical power meter
  9. Optical tool kit –splicers and connectors
  10. Optical fibres
  11. Laser trainer

ECE Association is an entity of the Department of Electronics and Communication Engineering . This association aims at: cultivating and improving the organizing capabilities of the students, bringing out the technical skills and non-technical skills. This association conducts events like symposiums, workshops, career development programmes etc.

Professional bodies that our students can be a member of

  1. The Institution of Electronics and Telecommunication Engineers (IETE) students’ forum
  2. Institutuion of Engineering and Technology(IET)
  3. IEEE
  4. ISTE
  5. EMC2
  6. Instrument Society of India (ISOI)
  7. Institute of Engineers (India)

Courses conducted

  1. DOTNET
  2. CCNA
  3. EMBEDDED SYSTEMS
  4. SYSTEM HARDWARE MAINTANENCE
  5. JAVA
  6. SMART CLASS FOR PLACEMENT
  7. PLACEMENT TRAINING BY IBM

Courses that can be conducted

  1. C/C++
  2. CCNP
  3. VLSI DESIGN
  4. SAP
  5. ORACLE
  6. MATLAB
  7. Model SIM
  8. Lab view
  9. KEIL
  10. Proteus
  11. PSIM
  12. Cadence
  13. PCB designing and Circuit simulation

Paper Presentation

SL.NO STAFF NAME PAPER PRESENTED DATE AND VENUE
1 Mrs.N.Revathy Instant fracture detection using IR rays

 

   International Journal of  Computational Engineering

research  (IJCER) ISSN :2250 – 3005 ,

Volume 05 , Issue 04 , April 2015
2 Mrs.N.Revathy Instant fracture detection using IR rays International Conference on Developments in

Engineering Research, ICDER, BANGALORE – 2015.
3 Mrs.N.Revathy Two step personal authentication using finger

vein recognition and GSM  technology.

 International conference on Advance research in

Technology and Engineering, ICARTE’15
4 Mrs.N.Revathy A Guassian UWB pulse generator analysis(• won the best paper in the International conference ICTET ‘15) Interantional Conference on Emerging Trends, ICTET 15
5 Mrs.N.Revathy Analysis Of Uwb Pulse Generator For Short Range

Applications

 International Conference on advanced ComputingICOAC’14
6 Mr.M.Murali Intelligent Bill producer with instant alert system using GSM National Conference on Recent Trends in Electronics and Communication (NCRTECE 2014)
7 Mr.M.Murali Next generation electronic voting system for visually impaired citizens using tft ballot National Conference On Recent Trends In Electrical Technology (Rtet 2k14) At Vels University, Chennai, Tamilnadu, India.
8 Mrs.N.Revathy    Design of low power pulse generator using RF MEMS International conference on emerging trends,2012
9 Mrs.N.Revathy Design of low power pulse generator using RF MEMS Was selected in the TOP 5 of  the Bachelor’s category –CADENCE DESIGN CONTEST 2012.
10 Mr.M.Murali Implement a Prototype model for school security system using RFID 3rd International Conference on computing , Communication and networking technologies at SNS College of Engineeing, Coimbatore on 26-28 July 2012
11 Mr.M.Murali Implementing prototype model  for school security system (sss) using rfid IEEE – Journal Published in Computing Communication & Networking Technologies (ICCNT), 2012 Third International Conference on 26-28 July 2012.
12 Mr.M.Murali Implementing Prototype Model For School Securitysystem Fifth National Conference on Digital Convergence 2012 at R.M.K Engineering College on 21st April 2012.
13 Mr.Yoganathan.M Coaxial fed double L-slot mcrostrip patch antenna array for WLAN and WiMAX applications IEEE – International conference on communcation and signal processing ,2012
14 Mr.M.Murali “Inbuilt charging techniques for mobile phone using voice signal, human activities and temperature”. International Conference – 8th Meet of ISE and HWWE 2011 at IIT Madras, Chennai , India conducted on 15th -17th of December 2011.
15 Mr.M.Murali Development of an remote multi-parameter monitoring system for physiological stress related parameters ICMR, BRNS & CSIR Sponsored National Conference on Emerging Trends in Bio-Telematics and Medical Imaging at Sriram Engineering College on 24th and 25th February 2011.
16 Mr.M.Murali Physioligical Stress related data monitoring using muli-hop wireless networks for soldiers in warfield Fourth National Conference on Digital Convergence 2012 at R.M.K Engineering College on 16th & 17th April 2011.
17 M.Mariselvam Implementation of SOC using GALS Gojan school of Business & Technology.

Workshops

SL.NO STAFF NAME WORKSHOP ATTENDED DATE AND VENUE
1 Ms.R.Nithya Work shop on VLSI design and circuits Anna University-Chennai 2012
2 Mr.Yoganathan.M Participated “WORKSHOP PROGRAMME ON ‘ANSOFT’ Abdul Rahman University 2012
3 Mr.M.Murali Attended ICMR Sponsored National Seminar on “Technology Advances in Biomedical Engineering” Department of Electronics and Instrumentation,St.Peter’s university, Avadi,Chennai on January 6th and 7th 2011
4 Mr.M.Murali Attended DRDO Sponsored National Technical Seminar in ” Recent and Research Issues in Power Quality Improvement” Department of Electrical and Electronics Engineering, Sriram Engineering college on Jan 24-25 ,2011
5 Mr.M.Murali Attended a CSIR & IETE sponsored Workshop on “Recent Advances in VLSI” Electronics and Communication Engineering, Sriram Engineering College, Perumalpattu on January 27th and 31st 2010.
6 Mr.M.Murali Attended a Two day  NationalLevelWorkshop on “Composite Materials in Research & Industrial Applications” Sponsored by DRDO & CSIR, New Delhi and Organized by Department of Mechanical Engineering, Sriram Engineering College on April 28th and 29th 2010.
7 Mr.M.Murali Attended a workshop on “Evolution of Embedded Systems’10” Spiro Solutions Pvt.Ltd, Chennai on 24th June 2010.
8 Mr.M.Murali Two day  Workshop on Virtual Instrumentation using“   Lab VIEW VLSI –TCAD,IC CAD, FPGA Design using silvaco and Tanner Tools Electronics and Communication Engineering Department, Velammal Engineering College, Chennai -66 in association with Trident Techlabs Pvt. Limited, Bangalore on November 4th and 5th 2008.

Faculty Development Programmes

SL.NO STAFF NAME FDP ATTENDED DATE AND VENUE
1 Mrs.N.Revathy Advanced leadership skills ICT academy of Tamilnadu, Chennai Nov ’15
2 Mr.M.Murali Attended a AICTE Sponsored Faculty Development programme on “Hands on Training on Design Finishing for chip tapeout” Department of Electronics and Communication Engineering, R.M.K Engineering College,Kavaraipettai, from June 17th to June 29th 2013.
3 Mr.M.Murali Attended a CSIR Sponsored Faculty Development Programme on “Recent Trends in Wireless Information\Networks and Systems” Department of Electronics and Communication Engineering, Sriram Engineering College, Perumalpattu from July 7th to July 10th 2010.
4 Mr.Santhosh.S Participated “FACULTY DEVELOPMENT TRAINING PROGRAMME SUMMER 2012″ON ‘DIGITAL IMAGE PROCESSING   RMK Engineering College
5 Mr.Santhosh.S Participated “FACULTY DEVELOPMENT TRAINING PROGRAMME SUMMER 2012″ON ‘VLSI DESIGN’   RMK Engineering College
6 Ms.R.Nithya NATIONAL CONFERENCE ON CARTOON + TEXTURE IMAGE FILTERS Eswari Engineering College
7 Ms.R.Nithya Participated “FACULTY DEVELOPMENT TRAINING PROGRAMME SUMMER 2012″ON ‘VLSI DESIGN’   RMK Engineering College
8 Mr.Yoganathan.M Participated “FACULTY DEVELOPMENT TRAINING PROGRAMME ON ‘DSP’   Jeppiar Engineering College